Silver round Ghau pendant with the Kalachakra symbol
Delicate round silver Ghau pendant: The domed front features the Kalachakra emblem set against a background of beaded wire; the side is adorned with a delicate band of wavy scrollwork between two lines of beaded wire. The back is adorned with a finely chased double vajra set within the scrollwork.
The Kalachakra symbol (Tib.Namchu Wangden, “the tenfold power”) combines ten intertwined syllables and symbols to form one of the most recognizable emblems of Tibetan Buddhism; the double vajra on the reverse side is considered a symbol of an unshakable foundation.
A ghau (also known as a gao) is a portable Tibetan amulet case used to hold prayer texts, blessed fabrics, or a yantra diagram. The pendant can be opened and closed again. Handcrafted in a traditional workshop in Nepal.
Height 36 mm (including eyelet) · Width 28 mm · Depth 12 mm · Eyelet ⌀ approx. 5 mm · Silver (925) · Handcrafted in Nepal
Bracelets, bangles, bangles, necklaces
| age | Wrist circumference |
|
Newborn |
9 - 12 cm |
|
6 months - 3 years |
12 - 14 cm |
|
4 - 10 years |
14 - 15 cm |
|
Teenager, ladies (XS) |
15 - 16 cm |
|
Ladies (M) |
16 - 17 cm |
|
Ladies (XL) |
18 - 19 cm |
|
Men (M) |
18 - 20 cm |
|
Men (XL) |
21 - 22 cm |
The length of the bracelet may be 1 cm to 3 cm longer than the measured wrist circumference, depending on your taste.
Finger rings
Ring size conversion table
| EU / CH | US size | UK size | Inner diameter (mm) | Inner circumference (mm) |
|---|---|---|---|---|
| 48 | 4.5 | I | 15.3 | 48.0 |
| 49 | 5 | J | 15.6 | 49.0 |
| 50 | 5.5 | J½ | 15.9 | 50.0 |
| 51 | 6 | K | 16.2 | 51.0 |
| 52 | 6.5 | L | 16.6 | 52.0 |
| 53 | 7 | M | 16.9 | 53.0 |
| 54 | 7.5 | N | 17.2 | 54.0 |
| 55 | 8 | O | 17.5 | 55.0 |
| 56 | 8.5 | P | 17.8 | 56.0 |
| 57 | 9 | P½ | 18.2 | 57.0 |
| 58 | 9.5 | Q | 18.5 | 58.0 |
| 59 | 10 | R | 18.9 | 59.0 |
| 60 | 10.5 | S | 19.2 | 60.0 |
| 61 | 11 | S½ | 19.6 | 61.0 |
| 62 | 11.5 | T | 19.8 | 62.0 |
| 63 | 12 | U | 20.3 | 63.0 |
| 64 | 12.5 | V | 20.6 | 64.0 |
| 65 | 13 | W | 20.9 | 65.0 |
| 66 | 13.5 | X | 21.3 | 66.0 |
| 67 | 14 | Y | 21.6 | 67.0 |
| 68 | 14.5 | Z | 21.8 | 68.0 |
| 69 | 15 | Z+1 | 22.1 | 69.0 |
| 70 | 15.5 | Z+2 | 22.5 | 70.0 |
Size categories:
Women:
- Very small: 48-50 (children/very petite)
- Small: 51-53 (petite hands)
- Standard: 54-56 ← most common sizes
- Large: 57-59 (strong hands)
- Very large: 60-62
Men:
- Small: 57-59 (narrow hands)
- Standard: 60-63 ← most common sizes
- Large: 64-66 (strong hands)
- Very large: 67-70 (very strong hands)
Brief instructions for measuring ring size:
- Take a ring that fits well.
- Place it on a ruler and measure the inside diameter (from one inner edge to the other).
- Compare the diameter with the table to determine the ring size.
- Take a thin strip of paper or thread.
- Wrap it around the part of the finger where you want the ring to sit (not too tight).
- Mark the point where the ends meet.
- Measure the length of the strip in millimeters. This is the inner circumference.
- Find the right size in the table.
- Measure the finger size in the evening, as fingers swell slightly during the day.
- If you are between two sizes, choose the larger size.
- Make sure that the ring fits over the knuckle.