Tealight holder - copper, double Dorje
Characterful square tealight holder made of handcrafted metal with a warm copper-iron finish in rust brown and anthracite, measuring 10 × 10 x 10 cm. Each of the four sides shows an openwork double Dorje ( Vishvavajra, tib. རྡོ་རྗེ་རྒྱ་གྲམ།) in relief - by candlelight, the motif casts an impressive shadow pattern on the wall and ceiling. The lively, irregular surface with a hammered texture is typical of Nepalese craftsmanship and makes each piece unique. They are made for us in a traditional workshop in Nepal.
The double Dorje is created from two crossed vajras and symbolizes unshakeable stability in all four cardinal directions. It is regarded as the foundation of the manifested world - the foundation on which the mandala of the universe rests. In Tibetan Buddhist iconography, it often appears on ritual objects, temple pedestals and protective amulets as a sign of absolute stability and spiritual anchoring.
Bracelets, bangles, bangles, necklaces
| age | Wrist circumference |
|
Newborn |
9 - 12 cm |
|
6 months - 3 years |
12 - 14 cm |
|
4 - 10 years |
14 - 15 cm |
|
Teenager, ladies (XS) |
15 - 16 cm |
|
Ladies (M) |
16 - 17 cm |
|
Ladies (XL) |
18 - 19 cm |
|
Men (M) |
18 - 20 cm |
|
Men (XL) |
21 - 22 cm |
The length of the bracelet may be 1 cm to 3 cm longer than the measured wrist circumference, depending on your taste.
Finger rings
Ring size conversion table
| EU / CH | US size | UK size | Inner diameter (mm) | Inner circumference (mm) |
|---|---|---|---|---|
| 48 | 4.5 | I | 15.3 | 48.0 |
| 49 | 5 | J | 15.6 | 49.0 |
| 50 | 5.5 | J½ | 15.9 | 50.0 |
| 51 | 6 | K | 16.2 | 51.0 |
| 52 | 6.5 | L | 16.6 | 52.0 |
| 53 | 7 | M | 16.9 | 53.0 |
| 54 | 7.5 | N | 17.2 | 54.0 |
| 55 | 8 | O | 17.5 | 55.0 |
| 56 | 8.5 | P | 17.8 | 56.0 |
| 57 | 9 | P½ | 18.2 | 57.0 |
| 58 | 9.5 | Q | 18.5 | 58.0 |
| 59 | 10 | R | 18.9 | 59.0 |
| 60 | 10.5 | S | 19.2 | 60.0 |
| 61 | 11 | S½ | 19.6 | 61.0 |
| 62 | 11.5 | T | 19.8 | 62.0 |
| 63 | 12 | U | 20.3 | 63.0 |
| 64 | 12.5 | V | 20.6 | 64.0 |
| 65 | 13 | W | 20.9 | 65.0 |
| 66 | 13.5 | X | 21.3 | 66.0 |
| 67 | 14 | Y | 21.6 | 67.0 |
| 68 | 14.5 | Z | 21.8 | 68.0 |
| 69 | 15 | Z+1 | 22.1 | 69.0 |
| 70 | 15.5 | Z+2 | 22.5 | 70.0 |
Size categories:
Women:
- Very small: 48-50 (children/very petite)
- Small: 51-53 (petite hands)
- Standard: 54-56 ← most common sizes
- Large: 57-59 (strong hands)
- Very large: 60-62
Men:
- Small: 57-59 (narrow hands)
- Standard: 60-63 ← most common sizes
- Large: 64-66 (strong hands)
- Very large: 67-70 (very strong hands)
Brief instructions for measuring ring size:
- Take a ring that fits well.
- Place it on a ruler and measure the inside diameter (from one inner edge to the other).
- Compare the diameter with the table to determine the ring size.
- Take a thin strip of paper or thread.
- Wrap it around the part of the finger where you want the ring to sit (not too tight).
- Mark the point where the ends meet.
- Measure the length of the strip in millimeters. This is the inner circumference.
- Find the right size in the table.
- Measure the finger size in the evening, as fingers swell slightly during the day.
- If you are between two sizes, choose the larger size.
- Make sure that the ring fits over the knuckle.
