Trotting horse - silver pendant from the Himalayas
Expressive silver pendant in the shape of a trotting horse, with finely chiseled details in the mane, coat and tail. Floral tendrils and blossoms are worked into the back using traditional craftsmanship. The pendant is made exclusively for Atelier Tibet in a traditional Tibetan silver workshop in Nepal - in a small limited edition for the Year of the Fire Horse.
The height (incl. eyelet) is approx. 30 mm, the width approx. 32 mm. The diameter of the eyelet is 5 mm.
In Tibetan Buddhism, the horse - as a lungta or wind horse - is one of the most important symbols of all. It stands for luck, life energy and the upward wind of the spirit:
- The wind horse carries the wishing gemstone jewel (norbu) on its back, thus connecting earth and sky.
- It symbolizes the power to carry good energy and prayers in all directions - which is why it is the central motif on Tibetan prayer flags (lungta flags).
- The galloping horse stands for freedom, strength and the unhindered flow of good fortune.
As these are traditional hand-forged pieces, they may differ slightly from the picture.
Bracelets, bangles, bangles, necklaces
| age | Wrist circumference |
|
Newborn |
9 - 12 cm |
|
6 months - 3 years |
12 - 14 cm |
|
4 - 10 years |
14 - 15 cm |
|
Teenager, ladies (XS) |
15 - 16 cm |
|
Ladies (M) |
16 - 17 cm |
|
Ladies (XL) |
18 - 19 cm |
|
Men (M) |
18 - 20 cm |
|
Men (XL) |
21 - 22 cm |
The length of the bracelet may be 1 cm to 3 cm longer than the measured wrist circumference, depending on your taste.
Finger rings
Ring size conversion table
| EU / CH | US size | UK size | Inner diameter (mm) | Inner circumference (mm) |
|---|---|---|---|---|
| 48 | 4.5 | I | 15.3 | 48.0 |
| 49 | 5 | J | 15.6 | 49.0 |
| 50 | 5.5 | J½ | 15.9 | 50.0 |
| 51 | 6 | K | 16.2 | 51.0 |
| 52 | 6.5 | L | 16.6 | 52.0 |
| 53 | 7 | M | 16.9 | 53.0 |
| 54 | 7.5 | N | 17.2 | 54.0 |
| 55 | 8 | O | 17.5 | 55.0 |
| 56 | 8.5 | P | 17.8 | 56.0 |
| 57 | 9 | P½ | 18.2 | 57.0 |
| 58 | 9.5 | Q | 18.5 | 58.0 |
| 59 | 10 | R | 18.9 | 59.0 |
| 60 | 10.5 | S | 19.2 | 60.0 |
| 61 | 11 | S½ | 19.6 | 61.0 |
| 62 | 11.5 | T | 19.8 | 62.0 |
| 63 | 12 | U | 20.3 | 63.0 |
| 64 | 12.5 | V | 20.6 | 64.0 |
| 65 | 13 | W | 20.9 | 65.0 |
| 66 | 13.5 | X | 21.3 | 66.0 |
| 67 | 14 | Y | 21.6 | 67.0 |
| 68 | 14.5 | Z | 21.8 | 68.0 |
| 69 | 15 | Z+1 | 22.1 | 69.0 |
| 70 | 15.5 | Z+2 | 22.5 | 70.0 |
Size categories:
Women:
- Very small: 48-50 (children/very petite)
- Small: 51-53 (petite hands)
- Standard: 54-56 ← most common sizes
- Large: 57-59 (strong hands)
- Very large: 60-62
Men:
- Small: 57-59 (narrow hands)
- Standard: 60-63 ← most common sizes
- Large: 64-66 (strong hands)
- Very large: 67-70 (very strong hands)
Brief instructions for measuring ring size:
- Take a ring that fits well.
- Place it on a ruler and measure the inside diameter (from one inner edge to the other).
- Compare the diameter with the table to determine the ring size.
- Take a thin strip of paper or thread.
- Wrap it around the part of the finger where you want the ring to sit (not too tight).
- Mark the point where the ends meet.
- Measure the length of the strip in millimeters. This is the inner circumference.
- Find the right size in the table.
- Measure the finger size in the evening, as fingers swell slightly during the day.
- If you are between two sizes, choose the larger size.
- Make sure that the ring fits over the knuckle.
